ht1884 extractor tool doc no: ats-011030003 release date: 01-31-02 uncontrolled copy page 1 of 2 revision: e revision date: 09-29-09 extractor tool instruction sheet order no. 11-03-0003 engineering no. (ht1884) features this tool is designed to extract different terminal series from various plug and receptacle housings. see chart below. scope products : kk ? 3.96mm (.156 in) pitch crimp terminals terminal series no description housings series no terminal order no. 08-01-0101 08-01-0102 08-01-0105 08-01-0106 08-01-0121 08-01-0122 08-01-0123 08-01-0124 08-03-0101 08-03-0102 08-05-0103 08-05-0104 08-05-0105 08-06-0101 08-06-0102 08-06-0105 1797 kk ? 3.96mm (.156 in) pitch bifurcated terminals 1796 08-06-0106 08-07-0101 08-07-0102 08-30-0109 08-30-0110 08-34-0105 08-34-0106 1799 kk ? 3.96mm (.156 in) pitch right angle terminal 2139, 41696, 52213 and 52266 08-34-0109 08-35-0105 08-35-0106 08-03-0303 08-03-0304 08-05-0301 08-05-0302 4366 kk ? 3.96mm (.156 in) pitch straight- on dualcon tm terminals 4338 08-05-0305 40-01-1194 50-36-1873 08-03-0305 08-03-0306 08-05-0303 08-05-0304 4573 kk ? 3.96mm (.156 in) pitch cantilever straight-on terminals 4338 50-36-2431 50-36-2432 operation: 1. push the terminal forward in the arrow direction be fore using the extractor tool as shown in figure 1. ins ert the extractor tool into the slot on the bottom or t op of the connector housing. extractor tool extractor tool housing wire figure 1 locking tab housing terminal
ht1884 extractor tool doc no: ats-011030003 release date: 01-31-02 uncontrolled copy page 2 of 2 revision: e revision date: 09-29-09 2. depress the terminal locking tabs, push the termina l back through the connector slot and pull the terminated wire out in the arrow direction as shown in figure 2. caution : molex specifications are valid only when used wi th molex terminals, applicators and tooling. molex does not offer repair parts for extraction to ols due to the inexpensive nature of the tool. contact information for more information on molex application tooling p lease contact your nearest molex location shown bel ow. americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 wellington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com figure 2 extractor tool extractor tool housing wire locking tab locking tab t erminal terminal
|
